LOAD CELLS
Minibeam Strain Gage Load Cells offer exceptional accuracy. Eight
models operate in tension or compression in controlled environments.
Their compact size and cantilever beam design adapt them to a wide
variety of installations.
Interface has applied its proprietary, advanced materials technology to
strain gage and flexure design. The result is that its load cells are
recognized worldwide for the highest accuracy in the industry, yet priced
competitively with brands offering lower performance.
Minibeam electronic load cells have no moving parts. They cannot wear
out or get out of adjustment. Their specifications (below) prove
superior performance-a major factor in Minibeams wide acceptance in
critical applications such as: force and tensile testing; thrust
measurements; OEM scale applications; conveyor scales, check weighers.
counting and white scales. Their exceptional accuracy, small size and
mounting ease find high acceptance in ultra precision electronic scales
and laboratory instrumentation.
The Interface Minibeam Strain Gage Load Cells are now available with MR
coating as a cost effective method of protecting 25 thru 250 Ib load
cells from high humidity conditions (up to and including 95% Relative
Humidity) and periodic exposure to condensation. These units are not
intended for submerged operation. For specifications on lower capacity
models with MR (Moisture Resistant), contact Durham Instruments.
Sealed Super Beam (SSB) Load Cells are precision strain gauge load
cells designed for use in all weather, and in washdown environments.
Rugged, durable, reliable SSB Series Load Cells are excellent for use
in batching plants, scale pits, and other out-of-doors weighing and
testing applications.
Due to the compact sizes of the SSB Series Load Cells, they are ideally
suited for applications where vertical clearance is limited. Sealed
Super Beam load cells are compensated for the effects of temperature so
that unwanted zero and output variations are minimized. Capability to
withstand relatively high side loads which can be applied
simultaneously with axial rated load simplifies the mechanical
considerations of installation. The high output of 3mV/V provides easy
interfacing to signal conditioning electronics. SSB load cells have
through holes in both inactive and active ends, permitting a variety of
convenient mechanical attachments to mounts and loads. Both single and
multiple cell installations are popular in a variety of weighing, test
and process control applications.
INTERFACE load cells with their dual diaphragms are innately
compensated against barometric pressure when the exterior underside is
vented. Most sealed column cells, however, are not so compensated and
venting the interior of the cell provides compensation at the expense
of the hermetic seal.
Why INTERFACE Platinum series load cells are the best in class:
•Handcrafted excellence for the most demanding calibration
requirements • Tension and compression in one unit •.005%
nonrepeatability • 2% lower load limit per ASTM E74 • High precision
base installed • ASTM E74 calibration standard • Internal electronic ID
• Eccentric load compensated •.0008%/°F temp effect on output
•Connector protector standard Shown with optional female thread.
The Micro-P, Mighty-1 and Mighty-4 digital displays are
state-of-the-art instruments for a wide range of monitoring
and control applications. By simple front panel push-button
setup, these displays can indicate DC Voltage or Current,
True RMS Voltage or Current, strain gauges, Process
Signals, seven Thermocouple types, 100 ohm Platinum
RTD's as well as load cells.
|load cells|data acquisition systems|digital panel meter|LVDT|
|
