ROOM DIVIDERS
Skyfold room dividers is ideal for various professional offices such as
law offices, universities & Colleges, financial Institutions, insurance
companies, training facilities, corporate offices and boardrooms,
auditoriums, convention center meeting rooms specialty applications in
hospitals, hotel meeting rooms and just about anywhere where sound,
space or ease of use is an issue!
Remote Drive System The motor/shaft/drum assembly is off-set from the
centre line of the room dividers. The required distance depends upon
the height of the wall. Support steel is required at two locations.
The restriction for these room dividers is a maximum 24’-0” (7.315m)
finished ceiling height.
When room dividers are lowered (closed), it shall stop if the leading
(bottom) edge comes into firm contact with any object between it and
the floor. The regular operation of the room dividers will resume once
the key switch has been released and the direction of the wall has been
reversed and the obstruction removed.
We make sure to you what is offered on the lifting mechanisms for your
room dividers. Notably for the remote drive system, each wire rope
cable winds and unwinds on its own cable drum. The cable drums is
grooved to accept a single layer of cable and have a minimum pitch
diameter of 20 times the cable diameter. Length of drums have to be
sufficient to accommodate 3 cable safety wraps. Cable drums are keyed
to the line shaft. For the compact drive system, the cable wraps on
yoyo drums with 2 safety wraps and multiple layers of cable.
|room dividers|automatic walls|acoustic|operable partitions|
|
